Festool Jigsaw Blade Search

Type of Material

23 matching blades found.

Material Thickness

Type of Cut

The S 50/1.4 K jigsaw blade is an excellent blade for scroll-cutting and making tight curves in a wide range of materials. Achieve very good results in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE, hard plastics, Plexiglas, acrylics and similar materials. The conical ground teeth and 18 TPI ensure very fine cuts even in delicate materials.

Festool recommends the S 50/1.4 K based on your application.

The R 54 G jigsaw blade is a special blade for cutting glass, wall tile, ceramics, fiber-reinforced plastics, cement board, iron, and steel. This blade doesn't have teeth, but hard soldered carbide tipped splitters that cut through a wide variety of tough materials.

The HS 60/1.2 bi jigsaw blade is a longlife, bimetal blade for fine cuts in non-ferrous metals, aluminum, iron, sheet steel, extrusions, and other similar materials. The precision milled teeth of this corrugated blade are extremely tough and last a long time, even in hard to cut materials. An excellent blade for all non-wood materials for very fine cuts up to 1 3/16 inches.

The HS 60/2 bi jigsaw blade is a longlife, bimetal blade for cuts in non-ferrous metals, aluminum, iron, sheet steel, extrusions, and more. The precision milled teeth of this corrugated blade are extremely tough and longlasting, even in tough materials. A good general purpose blade for all non-wood materials for cuts up to 1 3/16 inches.

The HS 60/1.4 bi VA jigsaw blade is a longlife, bimetal blade for cuts in Stainless Steel. The precision milled teeth of this corrugated blade are extremely tough and longlasting. Thanks to its special design and material, it can achieve perfect cutting results in stainless steel. This blade is designed for one purpose only: Cutting stainless steel.

The S 75/2.5 jigsaw blade is an excellent choice for fine cutting in a wide range of materials. Precise, clean cuts can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The conical ground teeth ensure fine cuts even in delicate materials.

Thicker than any other jigsaw blade, the Festool CARVEX is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 75/4 FS CARVEX is capable of making perpendicular cuts in hard to cut materials up to 2 1/8 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others.

The S 75/4 K jigsaw blade is an excellent scroll-cutting blade for making tight curves in a wide range of materials. Achieve very good results in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. This blade also works well with the Festool guide rail and guide rail adaptor. The cross-set teeth are ideal for fast cuts.

The HS75/2.5 bi jigsaw blade is a bi-metal blade for for fine cuts in a lot of different materials. Very good results can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE, hard plastics, Plexiglas, acrylics, and similar materials. The cross-set teeth guarantee very fast cuts in different materials. The bi-metal blades outlast other blades significantly, especially in tough materials like hard plastics or laminates.

The S 75/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with a strong performance and very good value.

The HS 75/3 bi jigsaw blade is a bi-metal blade for for fast cuts in a wide range of materials. Ideal for plastics (soft and hard), ABS, HDPE, Plexiglas, acrylics, cement board, iron, steel, and similar materials. The cross-set teeth deliver very fast cuts. Festool bi-metal blades offer a significantly longer useful life than other blades, especially in tough materials like hard plastics or laminates.

The HS 75/4 bi jigsaw blade is a bimetal blade for for fast cuts in a wide range of materials. Choose this blade for excellent cutting results in softwoods, hardwoods, melamine, veneered plywood, chipboard, laminated boards, and similar materials. The cross-set teeth guarantee very fast cuts. Bimetal blade stay sharper and last longer than regular blades.

The HM 75/4.5 jigsaw blade is ideal for fast, rough cuts in a wide range of materials, and features carbide teeth for exceptional cutting results over a long service life. Designed to produce excellent cutting results in fiber-reinforced plastics, cement board, chipboard and similar materials. Resistant to high temperatures and extremely durable, this rough cutting blade outlasts most other blades by a wide margin.

Thicker than any other jigsaw blade, the Festool CARVEX is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 75/4 FSG CARVEX is capable of making perpendicular cuts in hard to cut materials up to 2 1/8 inches thick with speed and ease.

The S 105/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with great performance and a very good value.

The HS 105/1.2 bi jigsaw blade is a longlife, bimetal blade for fine cuts in non-ferrous metals, aluminum, iron, sheet steel, extrusions, and similar materials. The precision milled teeth of this corrugated blade are extremely tough and longlasting, even in difficult to cut materials. A perfect blade for fine cuts in tough materials.

The S 105/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with great performance and a very good value.

The HS 105/2bi jigsaw blade is a longlife, bimetal blade for fine cuts in non-ferrous metals including aluminum, iron, sheet steel, extrusions, and more. The precision milled teeth of this corrugated blade are extremely tough and longlasting, even in hard to cut materials. A good general purpose blade for all non-wood materials for cuts up to 3 3/8 inches.

The HM 105/4.5 jigsaw blade is an excellent blade for fast cuts in a wide range of tough materials. This blade is engineered to deliver exceptional results in fiber-reinforced plastics, cement board, chipboard and other similar materials. With durable carbide tipped teeth that are highly temperature resistant, this rough-cutting blade outlasts most other blades by a wide margin.

Thicker than any other jigsaw blade available today, the Festool CARVEX is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 145/4 FSG CARVEX is capable of making perpendicular cuts in hard to cut materials up to 4 3/4 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others.

The HS 155/2 bi jigsaw blade is a longlife, bimetal blade for cuts in thin non-ferrous metals, aluminum, iron, sheet steel, extrusions, and other similar materials. The precision milled teeth of this corrugated blade are extremely tough and longlasting, even in difficult to cut materials. This is the ideal blade for fine cuts in thin and tough materials, where a high number of TPI is required.

The S 155/W jigsaw blade is engineered to cut rigid foam and fiberglass insulation, cardboard, foam rubber, and similar materials up to 5 inches. The undulating blade is designed to give fast and clean cuts in materials that are normally processed with a box cutter or knife.