OF 2200 EB Imp. Router - 574689

You might even think it is a portable shaper

The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2" groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.

Includes 1/2" collet only. 8mm and 1/4" collets available separately.

This is the new imperial version of this tool. It is identical to the previous version with the exception of the units on the depth scale.

  • OF 2200 EB Imp. Router
  • OF 2200 EB Imp. Router
  • OF 2200 EB Imp. Router
  • OF 2200 EB Imp. Router
  • OF 2200 EB Imp. Router
  • OF 2200 EB Imp. Router

Features & Benefits.

Dust Extraction Column

Dust Extraction Column

The Dust Extraction Column is placed on the back of the OF 2200 and extends to the top of the router and includes a swivel nozzle. A design which keeps the power cord (also top mounted) and dust extraction hose out of your way. Coupled with the Festool Boom Arm (492 753), work smarter and take full advantage of operation without being impeded by cords and hoses. Festool recommends using a 36mm hose.

Intuitive Controls

Intuitive Controls

Operating the OF 2200 could never be easier. Controls are clearly labeled with icons indicating purpose and adjustment direction. Work smarter without having to locate the manual to make less common adjustments. Use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application. Sales and support numbers are also directly on the router for your convenience.

Magnetic Spindle Brake

Magnetic Spindle Brake

The Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method.

Tremendous Plunge Depth Capacity

Tremendous Plunge Depth Capacity

With 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1/256" (1/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5/64" (2mm) finishing pass setting.

Triple Bearing Design

Triple Bearing Design

The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. This is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.

Variable Speed Control

Variable Speed Control

Use the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi-Material Control (MMC) electronics to ensure constant speed under load. That means that the speed of the bit is constant as you plunge and move through the workpiece.

Locking Depth Stop Rod

Locking Depth Stop Rod

<p> The Locking Depth Stop Rod allows you save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step. Dial the micro-adjustment knob in increments of 1/256" (1/10mm) for the ultimate plunge depth precision.</p>

Single-Tool Ratcheting Collet

Single-Tool Ratcheting Collet

Bit changes have never been easier. Use the spindle locking lever to disengage spindle movement and loosen the collet with a ratcheting motion. The ingenious retractable 360° dust shroud and wide plunge column spacing enables open access to the collet.

Retractable, Spring-Loaded 360º Dust Shroud

Retractable, Spring-Loaded 360º Dust Shroud

<p> Work smarter with the Retractable, Spring-Loaded 360° Dust Shroud of the OF 2200. The shroud maximizes dust extraction while providing high visibility of the workpiece. Release the dust shroud using a release lever at your fingertips. The shroud retracts back into the locked position after the router is fully plunged.</p>

1/2" Collet

1/2

The 1/2" collet of the OF 2200 allows you to take full advantage of its 2200 Watts of power. With an opening of 3-3/8" on the standard base, the OF 2200 can take advantage of a full assortment of router bits.

See it in action!

Ben Riddering

Watch video of Ben Riddering of Ben Riddering Design & Woodcraft as he talks about how Festool power tools enable him to produce heirloom quality furniture without having to complete against large retailers.

Have a question about this product?

We’re here to help. Feel free to give us a call toll-free at 888-337-8600 or use our contact form and one of our tool application specialists will help answer your questions.

Looking for reviews, opinions or advice?

Visit the Festool Owners Group forum, consisting of over 15,000 international members. The forum is a great place to collaborate with other Festool power tool owners. There's no better online resource of Festool information than the Festool Owners Group.

Festool Owners Group

© Copyright 2017 Festool USA, Tooltechnic Systems, LLC. All rights reserved. Festool reserves the right to correct any erroneous information on this site.